Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 22.06.2025 11:25

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Genetic and biological clues point to inflammation’s role in mental health - PsyPost

so, what happens?

In schematic diagrams this is the symbol for a fuse:

These are simplified answers to the original question, and does not change anything I wrote above.

Why did Kamala say immigrants eating cats isn’t real when there’s police bodycam footage of it happening?

This one hit behind the barn.

But… the neutral is now “floating” because of the 1 ohm resistance.

a photo is worth a thousand words.

Are there currently any Linux distros that use AI features?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

One is “what exactly is in a ‘surge protector’ ? ”

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Asteroid 2024 YR4 Could Strike the Moon: NASA’s Webb Telescope Warns - The Daily Galaxy

A circuit breaker is similar, but is resettable.

These devices are installed between the “hot” and “neutral” and protective ground.

He then describes Rainy Season and Lightning.

Giants Activate Jerar Encarnacion - MLB Trade Rumors

This is where the MOV conducts again, and dissipated the energy.

but this device (an Inductor) … impedes the rapid changes in the current.

First Sentence:

Asia-Pacific markets trade mixed as investors assess Trump claims of 'done' deal with China - CNBC

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

I post the exact comment here.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Can you tell me a depressing story?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

what exactly is a ‘surge’ protector?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Retinal prosthesis woven from tellurium nanowires partially restores vision in blind mice - Phys.org

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Why aren't U.S. prisons more like Marine Corps boot camp, were every second of the day there are mandatory activities so that at night everyone is so tired they go to sleep until wakeup at 5:30 am? Would this make prisons safer for all?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

The other is “what does a “fuse” do?”

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What do you think about Vivian Jenna Wilson's decision to speak out against her father, Elon Musk, in a public interview with NBC News?

Barnstars:

the problem then depends on "how fast does the fuse operate?".

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

How can one translate "You're welcome" from English to French using formal language? Are there any other ways to say this phrase in a more polite manner?

There are three different concepts here that are getting confused.

What is lightning?

This device then solves the entire problem.

Northern Lights Alert: 8 States May See Aurora Borealis Monday Night - Forbes

One

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

First glimpse of a charred scroll after two millennia thanks to AI and X-rays - Earth.com

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

What does a fuse do?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

There are two important concepts here.

At one ohm, the resistor has a maximum of 1 watt power.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The bolt then partially travels down the line to your home.

nine

2024–10–10[John johnson John Johnson ]

but I think this circuit , shows a few more pieces.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

It also is a device that limits the change in current flow.

An AC voltage/ current source, and an ac inductive load.

Edit 2024–10.

So, the voltage could go up to 500 volts, and the fuse will not open up.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

For this case there are devices called Metal oxide varistors (MOV).

eight

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

[old diagram got deleted by accident]

At least they know the answer if they wanted it.

Because the load is inductive, the current lags the voltage.(by a bit).

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Upvotes:

(Dc diagram shown, AC is similar).

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

A fuse is a non-resetable over current circuit protector.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Here is a simplified AC power diagram.

This is 'the assistant's answer'

He then describes the function of a fuse.

2024–10–14 [Omar Gharbi Omar Gharbi ]

It seems Mohan does not understand the difference between a comment and an Answer.

But it can get overloaded, and no longer works.

[image of Common-mode choke]

This is where this question deviates from being a 'generic' question, and becomes more specific.

The third is lightning and “how it gets conducted into a home.”

He then asserts :

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

2024–10–16 [ OO OLAOYE OYEBODE ]

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Now when you have a certain ac resistance, then a current flows in a loop.